Pulse jet single type dust collector

Introduction

Bag type industrial dust collector is a dry filter device. Which can separate the mixing air into clean air and dust in output. The pulse jet blowing is used to spray air or nitrogen into the filter bag. The purpose of pulse jet is removing the dust attached to the surface of the filter bag automatically .

Main product parameters

Air volume of dusty gas: up to 54000 m3/h
Filter area: up to 600 m2

Gas temperature: up to 280 degree
Dust concentration in output: up to 3mg / m3 ( more smaller more better)

APPLICATION

The picture on the left shows that the dust collector removes dust from the indoor grinding equipment. In addition, the dust collector can also be used in many occasions. See more application industries here.

For example: wood processing workshops, furniture factories, coal-fired boiler exhaust emissions, cement plants, various smelting and dust emission places. It is impossible to list them all, but only the dust removal of grinding equipment as an example.

PROJECT DISPLAY

Plastic polish powder dust collection project Plastic grinding particles have a small bulk density and are not easy to collect dust. With two-stage dust removal, the requirements of efficient dust removal can be achieved.	Crusher & belt conveyor The crusher produces a lot of dust. We set the dust collector above the conveyor belt, and the dust will be taken away by the conveyor belt in time.	Silo top dust collector When the silo is in use, a large amount of dust-laden gas will enter. Dust collectors prevent dusty gas from escaping and equalize pressure in silos

SERVICE SCOPE

1. Customized design

We will beginning our service upon received your industrial dust collection requirement. According to your detailed requirement, we will design the dust collector to suit for your circumstance.

In another words, for every customer, we will customized the equipment for every different circumstance application.

2. Manufacturing

As usual, according to the detailed dust collection circumstance Analysis, we can assure our equipment building material the mostly suitable (matching) for application. So that, One set of equipment can be used for more than 10 – 20 years. Even more, under good maintenance, It can support for 30 years operation.

3. Assembling & test running

4. Painting

Sandblasting is required before painting. Spray paint is three times: 1. metal primer 2. anti-corrosion paint 3.surface coat.

5. Check before shipment

We welcome customers to inspect the quality in person or by entrusting a third party before delivery.

Your valuable opinion is our way forward.

6. Installation guide & site construction

Our service lasts long after you use the equipment normally. During the service life of the equipment, we are responsible for the whole process of after-sales.

SHIPMENT

We can send full set of dust collector into one container

Filter cage & all spare parts will be packaged well.

PRODUCTION SPECIFICATION

Client

DUTCH ASPHALT MIXING PLANT GUEST

The guest factory equipment was burnt out because of entering sparks. They are urgent need the spark checking device to ensure the safe operation of dust collector. After purchasing our products, the use effect reaches the expected standard.

KNAUF FACTORY ENGINEER COME TO DISCUSS DUST COLLECTOR

The Knauf engineer talked with us about dust collector products. In order to avoid errors in production process, the engineer came from abroad to communicate with us.