研磨テーブル
The grinding workbench adopts a three-sided enclosed design, with air suction on all four sides, effectively controlling dust. The workbench is an air suction port, which can directly and efficiently collect dust at the source of dust generation, and promptly prevent the spread of dust. After the dust is purified by a high-efficiency flame-retardant filter element with an accuracy of up to 0.3um, the clean air is directly discharged outdoors to keep the workshop air clean. The filtered dust is collected in the dust collection drawer to prevent secondary pollution, and at the same time it plays a role in recycling precious metal materials.
- 説明
- 問い合わせ
導入
Working principle: This equipment adopts negative pressure design, that is, the dust-containing gas enters the lower box from the air inlet and is filtered through the filter cartridge. Due to the various effects of the filter cartridge, the dust and gas are separated. The dust is adsorbed on the filter cartridge, and the gas passes through the filter cartridge and enters the upper box from the venturi tube.
The purified air can be directly discharged through the return air port of the dust collector to complete the cycle of the entire system. As time goes by, the dust-containing gas passes through the filter cartridge. As time goes by, more and more dust accumulates on the filter cartridge, which gradually increases the resistance of the filter cartridge and gradually reduces the amount of gas passing through the filter cartridge. In order to make the dust collector work normally, the equipment is equipped with a pulse automatic cleaning device. The pulse controller sends a command to trigger each control valve in sequence, open the pulse valve, and make the compressed air in the air bag spray from the injection pipe through the venturi tubes of each hole into the corresponding filter cartridge.
The filter cartridge expands rapidly under the instantaneous reverse action of the airflow, so that the dust accumulated on the surface of the filter cartridge falls off, the filter cartridge is regenerated, and the dust that has been cleaned falls into the ash hopper. The ash hopper adopts a push-pull structure, and the cleaning process is quick and convenient. There is an ash discharge plate on the upper part to ensure that all the dust is concentrated in the ash hopper.
主な製品パラメーター
Equipment features: The grinding dust removal cabinet adopts a bottom-drawing and top-discharging internal circulation working mode. Its design principle is to improve the working environment of the work area by considering the working environment of the grinding workers/equipment operation reliability, operation and maintenance convenience, 等. on the premise of meeting the production process requirements. The dust-containing gas is evenly dispersed around the filter element, and the dust is adsorbed on the outer surface of the filter element. The purified gas is discharged through the filter cartridge through the upper air outlet of the box. As the use time increases, the dust adsorbed by the filter cartridge gradually increases, and the resistance of the dust collector continues to increase.
To ensure a good dust collection effect, the filter element resistance must be controlled within a limited range. The pulse controller sends a signal to open the pulse valve in sequence. Compressed air is ejected from the nozzles of the blowpipe to the corresponding filter cartridges. The gas in the filter cartridge expands instantly, causing the dust accumulated on the outer wall of the filter cartridge to fall into the dust box. The dust box adopts a push-pull drawer structure, and the dust cleaning process is quick and convenient. There is an ash unloading plate on the upper part to ensure that the dust falls into the dust box.
The grinding dust removal cabinet adopts a bottom-drawing and top-discharging internal circulation working mode. Its design principle is to improve the working environment of the work area on the premise of meeting the production process requirements, mainly from the working environment of the grinding workers/equipment operation reliability, operation and maintenance convenience and other aspects. The dust-containing gas is evenly dispersed around the filter element, and the dust is adsorbed on the outer surface of the filter element.
The purified gas is discharged through the filter cartridge through the upper air outlet of the box. As the use time increases, the dust adsorbed by the filter cartridge gradually increases, and the resistance of the dust collector continues to increase. It is suitable for grinding large workpieces.
機器の詳細
仕様
