Noticias

¿Cuál es la mejor presión de inyección para el colector de polvo de chorro de pulso??

¿Qué es la presión de inyección?? La presión de inyección: the pressure at which the pulse valve is opened and the compressed air is injected into the dust collector. The higher the blowing pressure, the faster the blowing speed and the better the cleaning effect. After the pressure drop of the bag filter is limited, the higher the injection pressure, the greater the processing...

Cómo lidiar con diferentes colección de polvo?

Hygroscopic deliquescent dust Hygroscopic and deliquescent dusts such as CaO, Na2CO3, NaHCO3, NaCI, etc.. are easy to absorb moisture and harden on the surface of the filter bag, or become viscous liquid after deliquescence. It will cause difficulty in cleaning, large pressure loss, and even force the dust collector to fail. When dealing with hygroscopic and deliquescent dust, the following should be...

Análisis de causa y solución de condensación de rocío en colector de polvo de bolsas de pulso

Analysis of Condensation Causes The condensation, Se refiere al fenómeno de que la humedad saturada se precipita del aire húmedo a una cierta presión y temperatura.. The temperature point at which moisture is released is called the dew point. The higher the gas pressure at saturation, cuanto menor sea el punto de rocío. Cuanto mayor sea el contenido de humedad en el aire., cuanto mayor sea el punto de rocío....

Do correcto de la instalación del colector de polvo

Precauciones para el funcionamiento diario del colector de polvo por impulsos (1) Cuando la instalación del colector de polvo funciona normalmente, the ash discharge cannot be stopped. Avoid dust accumulation in the hopper and force the dust collector to stop. Smoke and ash from the exhaust port indicate that the filter bag has been leaked. If any filter bag mouth is found to have dust...

Los puntos principales del diseño a prueba de explosiones del colector de polvo.

1 Condiciones de explosión 1.1 pulverized coal temperature Different coal types have different ignition temperatures, pero para polvo de carbón más fino, debido al aumento de la superficie específica, la temperatura de explosión es mucho más baja que su punto de ignición. Generalmente la temperatura de ignición está por debajo 40 ℃. 1.2 Volatile matter of pulverized coal The combustible gas produced by the heating of pulverized coal is burned before...

Diseño y selección de colectores de polvo para hornos eléctricos industriales.

Clasificación de hornos eléctricos industriales.: Horno de resistencia, horno de inducción, horno de vacío, horno de haz de electrones, tratamiento térmico (o fundición) unidad, heat treatment auxiliary equipment, combustion furnace. Industrial electric furnace dust removal mainly uses bag filter, and the dust hood is designed according to different working conditions on site. Por lo tanto, the difficulty of industrial electric furnace dust removal lies in the design and arrangement of...